2018 Schantz Galleries Seattle Tour photo album

These photos are taken by Roger Meyers. There were over 1600 images for us to choose from, and for those, he had to edit his images down from about 3000!  SO, this is a thank you to him and to all the other participants who journeyed on that 5-day tour and had the best time ever looking at glass, meeting the artists, touring around Seattle and dining on excellent food.


Walking into a hot shop is exhilarating, and even if you have done it before, that sense of wonder never lessens, believe us, as we have been going on these trips to Seattle for over 15 years, and some of our collectors have opted to go back with us 2 or 3 times…. It’s that good!

Below is a link to our online blog where many more photos are posted.

Enjoy!  Jim and Kim

 On this five-day Seattle Glass Collectors Tour, … Read More and see the photo album!


Ethan Stern – the Cold, Hard Truth

Ethan Stern – the Cold, Hard Truth…

detail of wheel

photo: Chris Sisco

The following is an essay titled, Cold Working Beyond Tradition written by Ethan Stern  for the GAS Journal for the 2014 Chicago Conference.  It is republished here with permission of the author.

Cold working is a part of the glass working process that involves cutting, grinding, polishing and generally manipulating glass in its cold state. This is obvious to most with experience in the field, but can also be mystifying to those with limited experience. Most students that I encounter come out of their respective glass programs not wanting to step foot in a cold shop again for as long as they can manage. This disdain from cold working usually comes from such projects as: Make a wonky block and cold work it into a perfectly symmetrical and optically polished cube. This project always takes hours and hours and usually ends with the student finishing the cube in the final hour and then dropping it on the way to critique, failing in miserable defeat. I bring this to light because my approach to cold work has taken a different path, which I demonstrated in Cold Working Beyond Tradition at GAS Chicago 2014.

Ethan Stern_6.Creative ProcessJPG

My glass-work is created with a combination of both blowing and sculpting of the bubble in the hot shop and carving the glass with diamond and stone wheels in the cold shop once its annealed. These two processes demand a completely different approach and create a very different type of creative space. The hot shop process is often fast, intense and team oriented. I work with at least three people in the shop and rely on each for a different part of the process. I owe much of the progression of my work in the hot process to these artists.  (photo Ken Emly)

Ethan Stern_5.Creative ProcessJPG

The cold working process in contrast is slow, wet and almost always done alone. For me this is when I develop a relationship with the objects that I create. Standing at the lathe, where most of cold work is done, I hold the objects in my hands and work the entire surface with the cutting wheels. At this point I can see every angle, every edge and experience the physical nature of the shape. Each engraved mark, like the stroke of a paintbrush on canvas or a finger pushed into clay; leave evidence of my hand and are undeniably connected to my process and the nature of the material itself. Feeling no ownership of the traditional techniques I employ, it is the revealing quality of carving that attracts me to this method of manipulating glass. (photo Chris Sisco)

Ethan Stern_1.Creative ProcessJPG


My Demonstration at GAS attempted to show my approach to glass cutting as one that re-examines the process of cold working and uses it to not only enhance the surface of a form or create ornamentation, but to materialize the overall voice of an object. To illustrate this I attempted to work a piece from start to finish over a period of three and a half hours in the cold shop of Ignite Glass studio in Chicago. I brought a blown piece with me that was approximately 10” x 10” x 3”. This piece is called “Quadraform” , and is part of my Structure Sound series. This series is inspired by the intersection of geography, architecture, and industrial design and how it can influence the visual deconstruction of our surroundings. The piece is blown with multiple layers of color and shaped into a geometric form in the hot shop. Normally cold working this piece from start to finish will take approximately 12 hours, but I rushed it a bit for the demo.

Ethan Stern_2.Creative ProcessJPG

I began by drawing on the surface of the object with a wax pencil to create a starting point and guideline. I often use a wax pencil, a graphite pencil or a sharpie to mark the surface prior to cutting it. The cutting process began with a rough diamond wheel used to carve the majority of material way.  I used an 80 grit sintered diamond wheel that had a flat profile to carve away the colored glass in a precise way with my drawings on the surface. I also used a spherical profiled 80grit diamond wheel to remove a bulk of the material that was not part of the design. Once I had removed the material and finished the basic image on the surface I used a 400grit diamond wheel with the same flat profile to smooth out the 80grit cuts. After the diamond cutting was complete I used an Aluminum Oxide Stone wheel to put a semi-polished surface on parts of the piece. This stone wheel had a leaded center and was used with a tapered and threaded spindle that fit onto the lathe shaft. The stone wheel removes very little glass but leaves a beautiful satin finish on the glass. The stone must be dressed and polished before it can polish the glass you are cutting with it. Lastly, I finished the entire surface of the form with 2F Pumice that I used with a brush wheel made from Tampico fiber to give the surface a semi-polish without losing the texture of the cutting. The bristles of the Brush wheel allow for the pumice to polish the surface without removing the grooves and marks left by the wheels. These steps illustrate the basic processes that I use in my own studio to cut and polish my blown works.

I would hope that the people who saw my demo could walk away from it with a better understanding of how to use cold working to effect their work in a new way by using it to create a dialog between form and surface. Carving, cutting, and engraving glass is approachable for every one regardless of their skill and knowledge of glass. Safe operation of machinery and a considered approach to the material can lead to great things in the cold shop with very rewarding results.

Ethan Stern_3.Creative ProcessJPG

photo: Ken Emly

Ethan Stern, 2013

Opal Audit, 2012

Opal Audit, 2012 photo Russell Johnson